China Conveyor manufacturer


You are here: Home> News

Time: 30th, July, 2013

Classification and characteristics of the Conveyor



Conveyor can be horizontal, inclined conveyor, also be composed of space transmission lines, transmission lines are generally fixed. Conveyor conveying capacity, long distance, but also in the transportation process while completing a number of process operations, so widely used.

Conveyor line in a certain material handling machinery continuous feed of material, also known as the continuous conveyor. Conveyor can be horizontal, inclined and vertical conveyor can also be composed space transmission lines, transmission lines are generally fixed. Conveyor conveying capacity, long distance, but also in the transportation process while completing a number of process operations, so widely used.

Can be a single conveyor can also be composed of multiple components or other power transportation equipment horizontal or inclined conveyor system to meet the different needs of the operating line layout.

Conveyor according to mode of operation can be divided into: 1: Belt Conveyor 2: screw conveyor 3: bucket elevator 4: Roller conveyor 5: measuring conveyor 6: plate chain conveyor 7: mesh belt conveyor 8: Chain Conveyor.

Parameter:

Generally based on the requirements of material handling systems, material handling location of a variety of conditions, the production process and material characteristics to determine the main parameters.

1. Transmission capacity: conveyor transport capacity per unit time is the amount of material transported. In transport bulk materials, power transportation of materials per hour mass or volume calculations; during transportation into items, the number of pieces per hour transport calculations.

2. Conveyor speed: increase transmission speed can increase transmission capacity. In order to make the traction belt conveyor length pieces and large, the conveying speed increasing day by day. But high-speed operation of the belt should pay attention to vibration, noise, and start braking and other issues. For chains as traction element conveyor, conveyor speed should not be too large to prevent increased dynamic loads. Simultaneous process operation conveyors, conveyor speed production process requirements should be determined.

3. Component size: scantling including conveyor belt width, belt width, hopper volume, pipe diameter and vessel size. These have a direct impact scantlings conveyor conveying capacity.

4. Transport length and angle: transfer line length and inclination of the conveyor directly affect the size of the total resistance and the power required.

Feature

Variable direction, the flexibility to change the conveying direction, the maximum can be up to 180 degrees;

Conveyors, each unit consists of eight rollers, each one unit can be used independently, multiple units can also be connected to use, easy to install;

Retractable conveyor, a unit ratio of the longest and shortest state can reach three times;

Chinabase Machinery is a group of manufacturing facilities, offering one-stop solution for mechanical power transmission products in China. we specialize in: Transmission chain(Driving Chain), Conveyor Chain - roller chain, Engineering Chain, Stainless Steel Chain, Lifting Chain, Agricultural Chain, Forging Series, Cast Iron Chain.





Article tags: Conveyor, Conveyor Chain,Power Transmission.




Related products: visit our Chain Catalog : http://www.power-transmissions.com/chain/chain.htm

Our Pulley Catalog:Pulley, China Bearing, Linear Bearing, American Standard Sheaves, Timing Belt Pulleys