Chain and Belt


You are here: Home> News

Time: 31th, Dec, 2013

The transportation and daily maintenance of plastic chain plate and belt conveying



Brief introduction of plastic chain plate

The plastic chain plate, the main material: steel ACETAL, polypropylene, polyethylene, nylon, PP, PE, PA, belongs to the conveying a band, and this is the new conveyor belt, than the traditional transportation to have many advantages: high strength, acid, alkali, salt and other characteristics, wide temperature range, anti adhesive good, can add baffle, lifting angle is large, easy to clean, repair simple.

Can be used to transport all kinds of environment. Such as the pharmaceutical industry, food industry, packaging industry, daily chemical industry, automobile industry, logistics industry, entertainment facilities, transmission belt, conveyor equipment etc.

The plastic chain plate and belt conveying transportation and daily maintenance

1.The conveyor belt during transportation and storage, should be kept clean to avoid direct sunlight or rain leaching, prevent and acid and alkali, oil.

Solvent contact with other substa.nces, and the heating device is one metre away from.

2.Storage warehouse should keep a temperature between 18-40 íŠ, relative humidity should be maintained at between 50- 80%.

3.The storage period, the product must roll placed, shall not be folded, placed the period shall be quarterly, turning once.

4.Different types of layers, specifications of the conveyor belt is connected together, the best use of the adhesive joint method.

5.A conveyor belt type, structure, specification, number should be selected reasonably according to the terms of use.

6.The conveyor belt speed generally should not be greater than 2.5 m / s, large blocks, wear resistant materials and the use of fixed pear.

Unloading device should be used in low speed.

7.The relationship between driving drum diameter, conveyor and conveyor belt cloth layer transmission drum, drum to supporting and the roller groove angle.

Requirements shall be designed according to the provisions of transport, reasonable selection.

From material receiving section; tape should shorten the roller spacing and the buffer roller for leakage, with adaptation by retaining plate of moderately soft, lest.

Gear plate is excellent, scraping the belt surface?

9.The conveyor belt in use should pay attention to the following matters:

To avoid the roller was covered by material, rotary, prevent material leakage card between the drum and tape, pay attention to lubricating moving parts.

But not greasy dirt conveyor belt;

Avoid starting with load;

The belt running deviation, take measures to correct application;

The discovery of local damage repair tape made cotton application, so as not to expand;

Classification of plastic chain plate

According to the material: PP, POM, polyethylene.

According to the pitch points: 12.5mm, 15.2mm, 19.05mm, 25.4mm, 27.2mm, 50.8mm, 57.15mm.

According to the degree of environmental protection: food, non food grade level.

According to the performance: high temperature resistant, oil resistant, wear resistant, acid and alkali corrosion.

Chinabase Machinery is a group of manufacturing facilities, offering one-stop solution for mechanical power transmission products in China. We can supply a full-range of power transmission products, such as chains, sprockets and plate wheels, pulleys, gearboxes, motors, couplings, gears and racks. Our product range also covers locking assemblies (clamping elements/locking device), taper bushes, QD bushes, bolt-on hubs, V belts,Timing belts,torque limiters, shaft collars, motor bases and motor slides, chain detachers, chain guides, universal joint, rod ends and yokes.




Article tags: Chain,Belts,Power Transmission.




Related products: visit our Rod end manufacturing : www.power-transmissions.com/Rod-end/Rod-end.htm

Chain catalog:Transmission Chain, Conveyor Chain, Engineering Chain, Stainless Steel Chain, Lifting Chain, Agricultural Chain Drop Forged Chain Series Cast Iron Chain